There are many advantages of Blown Insulation. First of all, it is fast and easy to install. Second, it can be used in more places than other forms of insulation, including attics and exterior walls. Third, it can be of a variety of depths. You can also choose insulation with different R-values depending on your requirements. Finally, you can choose what type you need according to your budget and goals. Contractor Services offers expert blown insulation installation to homeowners and contractors.
However, blown insulation can also settle. In certain conditions, blown insulation may settle, reducing its effectiveness. This is especially true if you are using certain materials and installing it yourself. Before making your final decision, it’s important to understand the advantages and disadvantages of each type of insulation. The pros and cons of blown insulation are described below. You should ask your contractor about your options if you are unsure which type of insulation you need.
The main difference between blown and loose-fill cellulose is the method of installation. Depending on how dense the material is, it can last between 20 and 30 years. In general, the most effective method is to hire a professional, but you can also do it yourself if you have the proper equipment. The main disadvantages of DIY blown insulation are:
If you are installing blown insulation around light fixtures, you should be careful. The insulation may cause fire if you do not create a proper enclosure around them. To reduce the risk of a fire, you can install boxes around these fixtures. The boxes can be made out of plywood or metal flashings. HomeWorks Energy can also perform this task for you. When deciding on blown insulation, consider the size and type of your light fixtures before making the final decision.
Other than cellulose, rock wool is another alternative to fiberglass. It is fire retardant and contains recycled glass. However, it is less expensive than cellulose and rockwool. And it covers a smaller area than fiberglass and loose-fill insulation. Unlike other forms of insulation, rock wool is lightweight and has a higher R-value. Moreover, it does not shift or absorb water, which is one of its advantages. Moreover, it is much easier to install compared to fiberglass.
When compared to other types of insulation, blown-in insulation is faster and easier to install. A professional installer can finish the job in a shorter period of time than a standard installation. You can even have two installers working at a time! One person feeds the insulation into a blowing machine on his truck, while the other spreads it around the home. When you hire USI, you can expect prompt completion of your project and a quality level that will leave you satisfied.
Another advantage of blown-in insulation is its ability to cover recessed lights. The material can also cover holes or joists. Another downside to blown-in insulation is that it tends to settle down by a couple of inches after a few years. It will also reduce the overall thermal resistance of the home. If you’re in doubt, you can opt for blown-in insulation if your existing insulation is inadequate.
Another major advantage of blown-in insulation is that it can be installed without disrupting existing surfaces. To apply the material, the technician will use a hose and pass it through any available opening in the wall. The technician will also drill holes at the top and bottom of the walls. Once the job is complete, the holes can be covered with plastic plugs. If you’re unsure about which type of insulation is best for your needs, you can always call a professional to help you with the process.
Before you apply the blown insulation, you must make sure that your attic is free of water leaks. Check the attic ceiling for signs of water damage, such as wet wood in the attic and dried water lines in one area. A home that is not properly insulated can cause a variety of problems, including mold and water damage. If you don’t have a lot of time to clean the attic, blown-in insulation might be the best option for you.
Blowing-in insulation requires a pneumatic blowing machine. Rent one from a home improvement store and have access to the attic space. Most blown-in insulation is composed of recycled materials. This material has an R-value of 2.2 to 3.8. In addition to being lightweight, it can provide a thick blanket of insulation over the floor of the attic. Blown-in insulation also fills gaps created by fiberglass batts. This thick layer of insulation can make a huge difference in your home’s comfort.
